I am currently building an antenna tracker using xbees/arduino, and would like to put all 3 of my antennas on one board. I have 900mhz xbee pro 100mw, 2.4ghz TX 1000mw, and a 1.3ghz vRX at 1500mw. Now as you can see on the picture i have them spaced about an inch apart and am wondering if this will cause interference since they are so close to each other. I have yet to try this setup and would like this to work, or something similar so i only need 1 pan/tilt tracking on the ground. Thank you!2010-09-10_21-13-52_640.jpg
Replies