Hi
I just got an APM 2.6 from 3dRobotics. Following ardupilot.com instructions for setup, I downloaded the Mission Planner Software. The issue is that all the setup instructions on the ardupilot website are for Mission Planner 1.2.62 software. All I can download is version 1.2.73. All the menus are different and so called required setting/calibrations are no where to be found. Of course I called 3dRobotics tech support and they said they are not affiliated with the APM folks (BS)
So I have two questions. Does anyone have a download link for Mission Planner 1.2.62 or can anyone walk me through initial setup with Mission Planner 1.2.73
Thanks
You need to be a member of diydrones to add comments!
Replies
Instructions for 1.2.73 are here
http://copter.ardupilot.com/wiki/initial-setup/common-load-firmware...
http://copter.ardupilot.com/wiki/initial-setup/configuring-hardware/
If you really want to use the old one you can find it here http://firmware.diydrones.com/Tools/MissionPlanner/
Question: What URL in the wiki are you looking at the has the old MP instructions?