Sorry, I'm a beginner. Someone can help. I can't start the engines. The receiver is a FrSky X8R, the Taranis X9D transmitter. I would like to know the wiring with Apm Copter Px4. Thanks Mario
You need to be a member of diydrones to add comments!
This reply was deleted.
Replies
Thank you very muchmario said:
Good evening . we are in PPM mode but I don't know where to connect the receiver. In the package there are no cables of any kind. There is another way of linking or a site where there are detailed explanations. I don't want to keep breaking the boxes every day. On the site you sent me I can't understand what kind of cables are needed or what add-ons. Sorry for the trouble, here is evening with you I don't know what time it is.
Is your Rx in PPM mode?
Hello, from the instructions I can't understand how to connect the radio receiver. I connected according to Frsky's instructions, but it doesn't work. I attach a picture entirely, maybe you can help me out
IMG_20200511_073512.jpg
IMG_20200511_073403.jpg
IMG_20200511_073447.jpg
That's a Pixhawk flight controller running ArduCopter. Follow the instructions here: https://ardupilot.org/copter/index.html
I bought from 3D Robotics 3 years ago and it has never been used, now I was going to start it but I can't
Above the control unit is written Apm Copter alongside Pix 4. The multirotor is a 3drobotics X8 If you help me , tomorrow I'll send you a photo of the flight controller . Tanks
Are you using ArduPilot or PX4 software? (There is nothing called "Apm Copter Px4")