Discussions

Hello!

I'm a new member on this forum. I'm 20 years old and live in Sweden
I have 3 years experience with rc planes and and just over one year with a quadcopter. 

My next project is to build a hexacopter to be able to film the campsite of my parents from the air! and later I would like to start with fpv!

So my question for the multicopter pilots on this forum is, What do you think of my setup? Are there things I need to adjust or is it juist fine?

These are the parts that I think to use:

Tunigy H.A.L hexa frame:
http://www.hobbyking.com/hobbyking/s...ame_775mm.html

Flight controler apm2.5:
http://store.jdrones.com/ArduPilot_MEGA_2_5_p/fcapm25top.htm

Motor, sunnysky A2814-900kv:
http://www.goodluckbuy.com/sunnysky-...lticopter.html

Esc 30A:
http://www.rctimer.com/product_876.html

Battry, 5Ah 2p:
http://www.hobbyking.com/hobbyking/s...lipo_pack.html

carbonfiber prop 13x5.5:
http://www.rctimer.com/product_920.html

Tarot gibal:http://www.hobbyking.com/hobbyking/s...ontroller.html

I will usa a gopro hero 3 black edition +

Of course I also buy a lot of extra wire and heat shrink!

All together makes the hexa about 2995grams

On the first pictures you can see the ecalc.ch calculations and on the other one the parts en wights!

What do you think of my parts?
If you know something how I can make this hexacopter better, let me hear it!

thanks already!

sunsky A2814-900kv 13x5 5ah 3s 2p.jpg

part list hexa.jpg