Discussions

HIL Simulation Pixhawk

Posted by Masu on February 5, 2014 at 12:20am

Hey Guys,

I have a problem.

I want to do a Hil simulation with my pixhawk, but it doesn't work.

I followed these steps: http://plane.ardupilot.com/wiki/flightgear/

But the first failure which occurs, that it's not possible to install the v2.68 for hil planes.

3691095781?profile=original

I'm using the MP 1.2.84, that's because it's the only MissonPlanner which creates me a map.

Even the new APMPlanner 2.0 (RC3) creates me a map neither.

Has anyone an idea what this is all about?

Best wishes and happy flying.

Masu

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Daniel Melia March 7, 2014 at 10:27am

    I am having the same problem, have you had any luck?

    • Masu > Daniel Melia March 9, 2014 at 11:46pm

      Hey Daniel,

      unfortunately I have to say no.

      But I figure out that there is no Simulation firmware for the pixhawk like the Hil firmware for the APM.

      I read also some other forums, and in these it says that the HIl simulation works fine with the QGroundControl.

      http://pixhawk.org/users/hil

      I haven't tested it, because I'm waiting for a solution so that I can use the MissionPlanner..

      Stay in contact 'bout this issue

      Greetz

      Masu

      • Chen Xiaolei > Masu May 8, 2016 at 6:18am

        hi,I am a Chinese student,I am using Pixhawk with Mission Planner 1.2.84 and FlightGear to HIL.but I failed.
        I don't know whether it's a version of the problem or Pixhawk can't do the HIL,hope for your response,THX

This reply was deleted.

Activity