Discussions

I have a HKpilot32 board and yesterday I got a solid red led, and it is not working at all

I flashed it two times, with no success.

It also connects to Mission Planner only from Terminal (no other way) and I got after the instruction sh/etc/init.d/rx.apm am

bins already mountes
removed old boot. log 
detected FMUv2 board 
uorb: already loaded 
uorb: started OK 
Trying PX410 board 
PX-4 io param_find (SYS_RESTART _TYPE) 
Telem> Failed to communicate with IO, abort. 
px4io: driver init failed
Loading /etc/px4i o/px4i o.bin 
[PX4IO] using firmware from etc/px4io/px4io.bin
[PX4IO] booloader not responding 
px4io: error updating PX4IO - check that bootloader mode is enabled 
Failed to upgrade PX4IO firmware 
PX4: param_find (SyS_ RESTART_ TYP'E)
telem> Failed to communicate with IO, abort. 
px4io: driver init failed 
No PX4IO board found 
Error in startup 
nshterm [26: 70] 
NuttShell (NSH) 
nsh> nshterm [27: 70]

What can I do? Any help will be appreciated