Discussions

I need help setting up a FPV camera on a Pixhawk

Posted by Grixis on July 14, 2016 at 3:23am

Hello all,

Im having difficuly setting up the FPV camera on my pixhawk and having it respond to the RC input. It wont move around and I cant get the GCS to read the channel 6 input.

Im using the RC805 transmitter system with 14db antennas

Im using the QGroundControl GCS

Im using Flysky FS-i6 RC

MavLink on 915mhz

RC on 2.4G

Video on 5.8G

I have the two servos that control the camera plugged into aux channel 2 and 3, it just wont respond. Can anyone help me out?

You need to be a member of diydrones to add comments!

Join diydrones

flysky, ptz, qgroundcontrol, fixed, setup, wing

Email me when people reply –

Replies

Moderator

Graham Dyer July 14, 2016 at 11:37pm

I've only managed this with Mission Planner not QGC. One thing there was to set the end points for the channels used for camera control. Do you need additional control through the Pixhawk? Otherwise for normal FPV just connect direct to Rx?