helloi am using R7G-T7G RF module for my telemetry project with my GPS working at 4800 but i am receiving a lot of noise at the receiver so my data is corruptedthe link to the datasheet of these modules ishttp://docs-europe.electrocomponents.com/webdocs/059f/0900766b8059f240.pdfcan anyone help me how to minimize the noisethanks
You need to be a member of diydrones to add comments!
Hi Syad,
have you determined as to what type of noise are you getting? Are these noise from near by other services or is it poor design or are you stetching the range etc? Your tx rx circuit you are using might hold the key , so posting it might help. type of antennas on both side with details like what cable, impedance match ( have you tested it?) Starting with installation photo, circuit etc will help get ideas. what channel are you using BTW?
Replies
have you determined as to what type of noise are you getting? Are these noise from near by other services or is it poor design or are you stetching the range etc? Your tx rx circuit you are using might hold the key , so posting it might help. type of antennas on both side with details like what cable, impedance match ( have you tested it?) Starting with installation photo, circuit etc will help get ideas. what channel are you using BTW?