In Stabilize mode motor acceletates

Quick one. When I stwitch to stabilize mode and the plane is pitch down attitude the motor goes on. I just want to staiblise. ? Is this right. Fly by wire B does same which seems correct but why stabilise mode. Am I been dumb?


You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –


  • mmm i thort I was dumb. with all the wiring I routed the elevator through onto port 3 and esc on  to 2. I couldnt see the extension cable that I installed was different. I swopped the extension cable so it ends with the same colour it starts, dumb dumb dumb. BUT it works really well now. lesson tidy up your cables even if you have a degree, masters or doctrate, you can still make dumb mistakes.

     ta for your help sorry for wasting time when it could be used for the really difficult questions.

  • 3D Robotics

    Stabilize does not control the throttle. You're probably in a different mode that does..

This reply was deleted.


Derrick Davies liked lisa TDrones's profile
xemone liked Max Gilson's profile
Aug 31
nick rymer left a comment on ArduCopter User Group
"I recently switched laptops and now have Windows 10. I installed Mission Planner on my laptop and plugged a mRo SiK Telemetry Radio into the USB port. The radio is not recognized on the com ports but is instead on the "Other Devices" tab in Device…"
Aug 20