Hi Happy New Year everyone.
I'm totally new in UAV. I bought Iris+ 2 weeks ago and had fun flying because is so easy. Now I got problem for won't arm and some errors say RC not calibrate. I read some forum and try to skip gps and it arm and the motor run (with out the propellers). After few test it did arm but the motors stop spin, Any advice to continue. Or any UAV
store know about Iris+ close to my area so I can visit and let them check correctly.
My Zip Code is CA 91790
Thanks
Eddie
Replies
I just recently retired and was looking for project to work on in my spare time. I found the IRIS. Part of the journey is learning and experimenting. It has been great fun and your right some of the information you need is not always right in front of you.
Have you watch some of the videos from 3DR. They are great help and were not available when I started. They can help you with setup issue.
You Also need Mission Planner so you can see what the issues are.
Also the great thing about a Pixhawk is that it records everything that happens while its armed. This can tell us what went on during your flight.
Also the support page at 3d robotics should be checked: http://3drobotics.com/support/