Hello all, im a newbie looking to get into the drone business of mapping and surveying. I have a few quad copters that can take care of small jobs and stills but Im now looking to increase my reach by having a fix wing drone in my arsenal. The cost of the fix wing drones for sale intended for mapping are pretty pricey. 

I was on youtube and stumbled upon a Skywalker Black X8 . Is there a possible way i could use an airframe like this or any other that you may suggest and make a mapping drone?

Im a novice but very tech savvy and can catch on quickly, what are all the components/parts I would need to make an autonomous fixed wing that takes stills, works with an autopilot and all of that jazz. Is this even possible for me to do?

Thank you for all of your help!!!

I'll probably use Pix4d for my rendering/stitching 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –


  • No problem :). Will try to help you as far as i can. There are also lots of members here who are willing to help.

    Samson said:

    Congrats on your new fixed wing, it looks great! I just sent you a friend request. I'd like to inbox your if you don't mind me picking your brain a little. Thanks ScratchNodado

  • Congrats on your new fixed wing, it looks great! I just sent you a friend request. I'd like to inbox your if you don't mind me picking your brain a little. Thanks ScratchNodado

  • Hi,

    I also do aerial mapping using diy fixed wing. Just finished my current aerial mapping platform using...

    Skywalker eve2000
    Pixhawk 2.1
    Sony A6000




  • Hello,

    I was just talking to a guy in Radio Shack who had come in for a part, and he told me that if he had to buy a new drone, he would go for the 3DR Solo.  I looked it up, and you can get it from Amazon or Best Buy for under $300 (I was just looking for the Skywalker X8 on Amazon and it's sold out). 

    I also just funded a Kickstarter project - the Jevois Smart Camera, and you can get a plug and play kit for just over $50.  I should be getting mine this month, and they are starting another batch next month.

    The Jevois Smart Camera can do OpenCV on board.  As far as the overall pipeline, you mentioned using Pix4d to do stitching - I'm not familiar with that yet.  Not sure if there's a way to transfer the video cheaply in realtime from the drone (I'm interested in learning more here), but if you could, then you could probably do the image stitching from your car with a laptop.

  • Might I interest you in one of my earliest builds?

    (See attached photo)

    I kid.....mostly.  Looks like Marc and Darrel got you covered!

    Broke Quad Pilot Final.jpg

  • Samson,

    I started building fixed-wing drones for AP a couple of years back. The building is an easy process (you will get really good at this as crashing is part of the learning process).  If you have never flown an RC plane however I would not start with the X8. I learned to fly with a local RC model club - you will need to fly in manual from time to time and this experience will save you a lot of heartache - it is very different to flying multirotors (but much more fun!),

    You can buy the Skywalker 1900 that the event drones are based on - they are great and we have used them successfully for longer flights (up to 50 minutes with an 8000mAh battery). They are really easy to fly but difficult to get hold of now.  We have just taken delivery of a Skywalker EVE-2000 - this looks like a fantastic AP platform.  We tried several flying wings but they are a pain to fly in manual by comparison. If you want to go that route then an X5 might be better to learn on, the X8 is difficult to get in the air!

    There are lots of other things to consider with fixed wings, not least the landing area required. Getting them to slow down as they land can lead to some challenges :)  But there are always parachute options - it depends on where you want to fly.

    Good luck


  • Sure you can. And you can buy them from here: https://event38.com/fixed-wing/e384-mapping-drone/   (among other places),

    You could buy all the same components and make this yourself -- but you really need to have done some flying first.

    The E384 Mapping Drone
This reply was deleted.


DIY Robocars via Twitter
DIY Robocars via Twitter
May 14
DIY Robocars via Twitter
May 13
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
May 13
DIY Robocars via Twitter
May 11
DIY Robocars via Twitter
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Noticed my car zigzagged in last run. It turned out to be the grass stuck in the wheel and made the odometry less accura…
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Test my car. RTK GPS worked great. Thanks @emlid for their support. https://t.co/EkQ6qmjmWR
May 8
DIY Drones via Twitter
RT @chr1sa: @kane That's @diydrones circa 2009. Still have a box of those Canon cameras that we used to strap into planes, just like this.…
May 3
DIY Robocars via Twitter
RT @chr1sa: Our next @diyrobocars race is going to be outside at a real RC racetrack in Fremont on May 28. Fully autonomous racing, head-to…
Apr 30
DIY Robocars via Twitter
RT @f1tenth: Our Spring 2022 F1TENTH course @PennEngineers is coming to an end with a head-to-head race as a big finale. So proud of our st…
Apr 26
DIY Robocars via Twitter
RT @DanielChiaJH: I wrote a thing! Throughout the development of my @diyrobocars car I've been using @foxglovedev Studio to visualize and d…
Apr 23
DIY Robocars via Twitter
RT @SmallpixelCar: My new car for high speed. Low body, everything ( @NVIDIAEmbedded Jetson Xavier NX, @emlid RTK GPS, IMC) under the deck…
Apr 23
DIY Robocars via Twitter
Apr 21
DIY Robocars via Twitter
RT @f1tenth: F1TENTH Race training setup @PennEngineers for our upcoming ICRA2022 @ieee_ras_icra competition. @OpenRoboticsOrg @IndyAChalle…
Apr 21
DIY Robocars via Twitter
RT @fatcatFABLAB: Proud to be hosting a restarted DIY Robocars NYC Meetup April 26. Come by if you want to talk about and race self-driving…
Apr 17