Just another 5 hour endurance full electric VTOL

We VTOLized the Raptor E1, at the same time we further optimized the power plant to achieve 50-80 Watt power consumption at cruise speed at 16.5 m/s with 3.5 Kg payload.

 All in all very happy with the conversion. If anyone interested we are taking pre-orders to setup a manufacturing line with an aerospace composite partner company in England UK. This would allow us to release a high quality full composite platform at an accessible price tag. 

Check http://www.raptoruas.com/ev.html for more info

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies



  • Graham Dyer said:

    2+ hours with LiPo's takes a bit of doing, with Li-Ion it's a bit easier but 5 hours is a real challenge especially if it's going to do a VTOL takeoff and landing.

    So I'd suggest doing a documented duration test, and post the log from whatever flight controller you're using. Or plot the flight out on Google Earth. Also use the test as a distance check. Calculations and real world tests can vary considerably. Only a very few have exceeded 200km and that's with highly optimized planes (non-VTOL) and very little payload.

    If you are happy with the log file, then that is easy enough. It is easy enough.  Will finish the V2 mods and get the log posted here. 



  • Gary Mortimer said:

    As regards proof, this is how we did it in the case of one manufacturer, I sent somebody to stand on an airfield to watch a six hour flight.

    We can do that again!

    OK, happy with that



  • Gary Mortimer said:

    Does it not contain your partner's fuel cell??

    https://www.suasnews.com/2015/09/uk-singapore-collaboration-prepare...

    No it doesn't, just a 28,000 mah LiPo

    I'm interested in what you say about aerodynamics as are not all of those negated with four extra props and associated gubbin s being dragged along for the ride most of the flight?

    Without the VTOL conversion the standard system is capable of more than 6 hours with the same battery.

    But as I said the two most important points other fixed wing UAVs are not getting the same performance is 1) airfoils 2) wingloading . This system has been optimized for max loiter at minimum power

  • Moderator

    2+ hours with LiPo's takes a bit of doing, with Li-Ion it's a bit easier but 5 hours is a real challenge especially if it's going to do a VTOL takeoff and landing.

    So I'd suggest doing a documented duration test, and post the log from whatever flight controller you're using. Or plot the flight out on Google Earth. Also use the test as a distance check. Calculations and real world tests can vary considerably. Only a very few have exceeded 200km and that's with highly optimized planes (non-VTOL) and very little payload.

  • Moderator

    As regards proof, this is how we did it in the case of one manufacturer, I sent somebody to stand on an airfield to watch a six hour flight.

    We can do that again!

  • Moderator

    Does it not contain your partner's fuel cell??

    https://www.suasnews.com/2015/09/uk-singapore-collaboration-prepare...

    I'm interested in what you say about aerodynamics as are not all of those negated with four extra props and associated gubbin s being dragged along for the ride most of the flight?

    UK-Singapore Collaboration Prepares for Record 300km Hydrogen Fuel Cell UAV Flight
    A new civilian fuel cell UAV designed for search and rescue is gearing up for the world’s first ever 300km UAV flight to cross the North Sea, linking…


  • Graham Dyer said:

    Why not put the motor wires inside the tube arms? Looks really tacky and unprofessional with them hanging loose with just the odd cable tie.

    Yes, agreed, this is the first conversion of the VTOL proto, so yes a bit rough

    5 hours duration on LiPo's is a pretty ambitious claim, do you have a log or video to back that up?

    Can't say I agree there is anything ambitious about this, it consumes 50-80 Watt at level cruise at 16.5 m/s at 3.5 Kg payload.with 200 Watt during turns But you are right we should back this up. 

     Would people be happy with a G-code verified GPS tracklog, what is it that people would like to see? and we will produce it.

    We have spent significant time in optimizing the power plant and the endurance is a product of the platforms aerodynamics and the power plant optimization.  I will say only one thing, the reason other UAVs are not achieving long endurance at least based on what we see is 1) wrong airfoil thickness, 2) high wing loading.

     Thanks

  • Moderator

    Why not put the motor wires inside the tube arms? Looks really tacky and unprofessional with them hanging loose with just the odd cable tie.

    5 hours duration on LiPo's is a pretty ambitious claim, do you have a log or video to back that up?

This reply was deleted.

Activity

DIY Robocars via Twitter
How to use the new @donkey_car graphical UI to edit driving data for better training https://www.youtube.com/watch?v=J5-zHNeNebQ
11 hours ago
DIY Robocars via Twitter
RT @SmallpixelCar: Wrote a program to find the light positions at @circuitlaunch. Here is the hypothesis of the light locations updating ba…
Saturday
DIY Robocars via Twitter
RT @SmallpixelCar: Broke my @HokuyoUsa Lidar today. Luckily the non-cone localization, based on @a1k0n LightSLAM idea, works. It will help…
Thursday
DIY Robocars via Twitter
@gclue_akira CC @NVIDIAEmbedded
Wednesday
DIY Robocars via Twitter
RT @luxonis: OAK-D PoE Autonomous Vehicle (Courtesy of zonyl in our Discord: https://discord.gg/EPsZHkg9Nx) https://t.co/PNDewvJdrb
Wednesday
DIY Robocars via Twitter
RT @f1tenth: It is getting dark and rainy on the F1TENTH racetrack in the @LGSVLSimulator. Testing out the new flood lights for the racetra…
Wednesday
DIY Robocars via Twitter
RT @JoeSpeeds: Live Now! Alex of @IndyAChallenge winning @TU_Muenchen team talking about their racing strategy and open source @OpenRobotic…
Nov 20
DIY Robocars via Twitter
RT @DAVGtech: Live NOW! Alexander Wischnewski of Indy Autonomous Challenge winning TUM team talking racing @diyrobocars @Heavy02011 @Ottawa…
Nov 20
DIY Robocars via Twitter
Incredible training performance with Donkeycar https://www.youtube.com/watch?v=9yy7ASttw04
Nov 9
DIY Robocars via Twitter
RT @JoeSpeeds: Sat Nov 6 Virtual DonkeyCar (and other cars, too) Race. So bring any car? @diyrobocars @IndyAChallenge https://t.co/nZQTff5…
Oct 31
DIY Robocars via Twitter
RT @JoeSpeeds: @chr1sa awesomely scary to see in person as our $1M robot almost clipped the walls as it spun at 140mph. But it was also awe…
Oct 29
DIY Robocars via Twitter
RT @chr1sa: Hey, @a1k0n's amazing "localize by the ceiling lights" @diyrobocars made @hackaday! It's consistently been the fastest in our…
Oct 25
DIY Robocars via Twitter
RT @IMS: It’s only fitting that @BostonDynamics Spot is waving the green flag for today’s @IndyAChallenge! Watch LIVE 👉 https://t.co/NtKnO…
Oct 23
DIY Robocars via Twitter
RT @IndyAChallenge: Congratulations to @TU_Muenchen the winners of the historic @IndyAChallenge and $1M. The first autonomous racecar comp…
Oct 23
DIY Robocars via Twitter
RT @JoeSpeeds: 🏎@TU_Muenchen #ROS 2 @EclipseCyclone #DDS #Zenoh 137mph. Saturday 10am EDT @IndyAChallenge @Twitch http://indyautonomouschallenge.com/stream
Oct 23
DIY Robocars via Twitter
RT @DAVGtech: Another incident: https://t.co/G1pTxQug6B
Oct 23
More…