Looking for opinions on my first full build

 Greetings all,

I have recently began planning on my first full drone build. I have some experience with building drones in the past, however those were mainly just RTFs that I would install a flight controller on. I have chosen the following list of parts as a basic build, however I would like some input from other people due to my lack of experience. It should be noted that I built this with some of the cheapest parts I could find.

What I am asking is:

  • Is there any potential compatibility issues between parts?
  • Should I consider upgrading, downgrading, or chaning a part?

 

Item

NamePrice(US)Weight(g)NotesLinkAltLinkConcerns
FrameDJI F450$9.99282450mm, built in power board(no BEC, the ESC will provide 5v)https://www.aliexpress.us/item/3256806172740382.html 

Motor/AP mounting compatibility

MotorsRacerstar BR2212$19.002081000KVhttps://www.banggood.com/Racerstar-BR2212-1000KV-2-4S-Brushless-Motor-For-RC-Models-Airplane-p-1083190.html Plug compatiblity w/ esc, having enough thrus, quality
PropsGeneric 1045$3.02201045, 5in radius, plastic, cheap, 4.5in pitchhttps://www.aliexpress.us/item/3256806142864879.html Durability
ESCsHobbywing Skywalker$56.201323.5mm banana plug, 30a, BEChttps://www.aliexpress.us/item/2251832682078093.htmlhttps://www.aliexpress.us/item/3256806478472300.htmlPlug compatiblity w/ motor, quality
ESC toolHobbywing Programming Tool$8.70N/AProprietaryhttps://www.aliexpress.us/item/3256806478472300.html Having enough features
AutopilotMatek H743-Slim$96.997Full features, need pdbhttps://www.getfpv.com/mateksys-h743-slim-v3-flight-controller.html Compatibility with receiver, fit on frame
PDBMatek PDB-XPW$10.997 https://www.getfpv.com/matek-pdb-xpw-5v-12v-dual-bec-pdb-built-in-150a-current-sensor-with-xt60pw-socket.html Is this even needed?
ReceiverRadioMaster RP1$18.992.2 https://www.radiomasterrc.com/products/rp1-expresslrs-2-4ghz-nano-receiver  
BatteryPre-owned$0.0030011.1v, 3s, LiPo, 5000mah   
        
Total $223.88958.2    

 

Thank you very much for the assistance!

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

This reply was deleted.

Activity