We are a new company in the market who make high performance and low cost RTK module for drones.
Please take a look and if you are interested, we can arrange a demo for you.
You need to be a member of diydrones to add comments!
This reply was deleted.
Replies
Hi,
What RTCM messeges are supported, all of the standard RTCM 2.3, 3.0 or 3.1? Because usually not all supported.
I plan to use only one rover, connected to the Hungarian national correction service.
When I receive the correction on my mobile phone I send to the Pixhawk.
How can is send it to this GNSS modul? I have to use I2C or Mavlink protocol? Do you have an example code?
It is enought to send in every 10 second, as I know?
How can I test it in our environment??? Is there any test version available?
By
N
I am lucky to have a pair of Tersus GPS chips. Anyone is close to Mountain View, CA can check them out and ask for a demo.
David
20151211_102729_resized.jpg
David,
I am near enough, in Sacto. Definitely interested in a demo. Please message me your contact info.
Cheers,
T
Sure, let me know when you can come down to south bay.
What/Who is "CA" ?
Why not for a demo, where are you located ?
I am located in Mountain View, CA. United States.
I am interested also on the demo. However, it is too far away from my home in Indonesia. Could you share video of the demo on youtube? Thank you.
I'm in France at this moment. It's too far away from me !
Does it work with Rtklib ?
kiki，
it doesn't need RTKLIB. we have in-house software loaded into onboard MCU, which have the function of RTK calculation.
you only need two antenna, two radio, two Precis boards. then you have the NMEA output.
-
4
-
5
-
6
-
7
-
8
of 8 Next