Discussions

Mode switch problem

Posted by Simon B on April 19, 2010 at 6:24pm

Hi all,

Can someone help me with setting up the mode switch.

I'm using a MX22 with a spektrum module.

I have run the Radio tester and servos in nuetral position about 1500.

When I run the mode switch test, nothing happens. MUX led is always off.

STAT Led is solid yellow.

Serial monitor  reads;

Init Ardupilot Control Switch Tester 2.5.0

##0 / MANUAL.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Simon B April 19, 2010 at 9:38pm
    Chris,
    The + pwr is just disconnected during that photo
    I'm tearing my hair out here, bugged If I know why it isn't switching.
  • Simon B April 19, 2010 at 6:59pm
    Hi Chris,

    Here is a pic of the connections

  • 3D Robotics
    Chris Anderson April 19, 2010 at 6:26pm
    Can you upload a picture of your board, with the RC cables all connected? It sounds like you've got something plugged in wrong.
This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
Santiago Perez liked Santiago Perez's profile
Jun 21
More…