Discussions

Posted by djhoser on October 7, 2010 at 8:14am

i have a question about helicopters what kind of motors do you use in the projects?

You need to be a member of diydrones to add comments!

Email me when people reply –

Dave Hickman January 21, 2011 at 10:39am

some of the smaller ones like the Honey Bee use a 4 or 4.5 volt. Not much get up and go

Dave
Brad Smith January 16, 2011 at 10:55am

well mine is a stock esky belt CP but as it sits now APM is not controlling the throttle on heli,s just make shure to get a ESC that outputs 5v not 6v if you already have one and its 6v u,ll need a bec .but it might be good to have the same set up as the ones that are writing the code so we could cut down trouble shooting
Tom Kopp October 7, 2010 at 8:21am

Which heli do you have, different motors for different sized helicopters. brushless out-runners are the best use now.

This reply was deleted.

Neville Rodrigues liked Neville Rodrigues's profile

Santiago Perez liked Santiago Perez's profile

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Please check your browser settings or contact your system administrator.