Developer

Hi all! I try to using a MTK3329 gps with another fc board for comparation test, unfortunately, this board only accepts "standard NMEA" at "38400 baud" by default (and not binary), I flashed the gps with the original firmware, but unfortunately the default output is at 9600 baud.
The board in question receives the data but does not send anything to the GPS, so it initializes, is expected to be ready to send data from gps unit.
With MiniGPS I can make all the changes I want, but when remove power the GPS then returns everything to the default.
I do not have the battery installed on the pin "VBackup", can you tell me if there is a way to write these parameters so that by accessing the unit again to keep them stored?
With "MiniGPS" i try to write the parameters to the internal flash, but from what I can see you can not do because there's no flash in this unit.


Bests,

Marco

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • You must initialize the unit at each power up. You are correct, you can not write configuration to the Flash.

    You flashed it with what "original" firmware? The (about 2 year old "1.4" that has bugs?)

    The MTK3329, sold by DIY Drones, will output NMEA @ 38400 bps by default. It must be commanded into binary mode. That sounds compatible with what you are asking for, no?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore ⁦@PiAndMore⁩ on Jan 23rd h…
Saturday
DIY Robocars via Twitter
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3: https://t.co/…
Saturday
DIY Robocars via Twitter
Great new guide to using @donkey_car https://custom-build-robots.com/donkey-car-e-book-en
Saturday
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch https://www.meetup.com/DIYRobocars/events/275268196/
Friday
DIY Robocars via Twitter
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
Thursday
DIY Robocars via Twitter
Jan 18
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
Jan 14
DIY Robocars via Twitter
Jan 14
David Hori liked Isabella Domi's profile
Jan 12
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ ⁦@f1tenth⁩ ⁦@DAVGtech⁩ ⁦@DWalmroth⁩…
Jan 11
DIY Robocars via Twitter
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time Le…
Jan 11
DIY Robocars via Twitter
RT @RoboticMasters: Thanks to @EllerbachMaxime and the Sydney Uni Capstone Students the @donkey_car @diyrobocars simulator is getting a ma…
Jan 11
DIY Robocars via Twitter
Jan 6
DIY Robocars via Twitter
Dec 28, 2020
More…