I have just received my new NavSpark GPS, I was wondering if I could use it as a simple GPS as a replacement for my Ublox module. I am a bit (lot) of a noob, and I was wondering if I could simply plug some pins directly across to the APM and have it work.I do know it uses NMEA for the GPS output messages.Here is the site where I got it from.https://www.indiegogo.com/projects/navspark-arduino-compatible-with-gps-gnss-receiverI am not trying to port Arducopter over to the navspark (thou that would be cool), Just trying to get the APM to see the GPS sats that the navspark sees
You need to be a member of diydrones to add comments!
Looks like the Arduplane devs decided to go with adding support for the $975/pair Piksi GPS project rather than the $50-160/pair Navspark based projects.
Replies
Looks like the Arduplane devs decided to go with adding support for the $975/pair Piksi GPS project rather than the $50-160/pair Navspark based projects.
Here is the post I have put up on the Navspark page, It seems to have a few people who wanted to help out with interfacing the two.
http://www.navspark.com.tw/forum/output-to-arducopter