Hi all,
Anybody an idea ? Trying to compile APM quadcopter with latest nuttx v7.xx
Nuttx part done, PX4 done , APM I think is done ...
This came up :
/opt/gcc-arm-none-eabi-4_9-2015q3/arm-none-eabi/include/c++/4.9.3/bits/postypes.h:227:16: error: 'mbstate_t' was not declared in this scope
typedef fpos<mbstate_t> streampos;
compilation terminated due to -Wfatal-errors.
make[3]: *** [uORBDevices_nuttx.cpp.o] Error 1
make[3]: Leaving directory `/home/lexx/ArduPilot/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/home/lexx/ArduPilot/ardupilot/modules/PX4Firmware/src/modules/uORB'
make[2]: *** [/home/lexx/ArduPilot/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//home/lexx/ArduPilot/ardupilot/modules/PX4Firmware/src/modules/uORB/module.pre.o] Error 2
make[2]: Leaving directory `/home/lexx/ArduPilot/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build'
make[1]: *** [/home/lexx/ArduPilot/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.px4] Error 2
make[1]: Leaving directory `/home/lexx/ArduPilot/ardupilot'
make: *** [px4-v2] Error 2
But
mbstate_t was included in mchar.h file and posttypes.h also include the mchar.h file
Any suggestion or perhaps even HELP would be appreciate
Any suggestion or perhaps even HELP would be appreciate
Greets
Replies
.... ERROR HAS BEEN FIXED ! ....
anybody an IDEA ?