Having a strange problem with the board and esc, when I have the switch in "CLI - mode" and connect the lipo then the esc go to their normal init, but when I put the switch in fly mode (towards the dipswitches) they stuck to only 3 bleeps
My config:
4 Mystery 12A controllers ( bought from Dealextreme)
2200 mAh 20C Lipo
4 920kV motors ( also from Dealextreme )
EM406a GPS
magneto
the last two bought from DIY-store ( monday 27-12-2010)
I have had some testflights with the old RC1, without magneto and GPS
Can someone have the answer?
Replies
Aha found the answer myself, the problem was my EM406a GPS module.
It looks like that the module not yet is implemented in the code, btw thx Chris Anderson , hopefully it soon will be.
Strange that they didn't mentioned it on the DIY store when i bought it 2 days ago. ( HINT )