Hello,
I finished assembling my ardustation, and everything seems work well.I loaded the Ardustation firmware v 12.
I use 2 XBee Pro 60mW Wire Antenna 2.4Ghz (900Mhz is not allowed in Europe) with GPS Mediatek DIYDrones and it works perfectly with Mission Planner programmed to 57600.
I have the LCD display, the blue LED is fixed and the red LED flashes continuously, but the problem that there is no data display.
Any help or suggestions would be appreciated.
Thank you

Views: 189

Reply to This

Replies to This Discussion

Old Ardustation fw v1.2 does not support mavlink that is main protocol now for communications between APM-MP and quads/planes.

 

There are a project undergoing to create new firmware for Ardustation hardware but I'm not sure how mature that is and how well it works with MAVLink.

 

Ardustation supports only older arduimu protocols.

Thank you for your information
Thanks for your time

Reply to Discussion

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service