good morning to all
i 'm discovering APM and i have some issue with the GPS side socket on the APM 2.5
i loaded the quadcopter 2.8.1 with the mission planner 1.2.29 and i use the 3dr gps mtk v2
my copter is flying well but i can not use the gps, it doesn't light at all neither blink.
i test through CLI test but nothing than point after 4minutes
i checked with a voltmeter and on the gps side socket i have no power but on the gps top socket there is power!!!
please help me to find the solution.
i checked the power setting of the apm (previous post on the site), try with another cable but nothing
please help i'm stock
regards
Replies
@dude,
Take a look at this GPS discussion: http://www.diydrones.com/forum/topics/ublox-gps-lea-6-v1-1?id=70584... especially my comments on the second page.
Regards,
TCIII
one more question :
would it be possible to connect the MediaTek MT3329 GPS V2.0 to the gps socket on the top of the APM2.5 ?
how to wire it ?
thanks for help