Discussions

No terminal tab

Posted by Magnus Pettersson on May 3, 2014 at 3:17am
After installing windows 8 and latest mission planner, I no longer have a terminal tab. How do I get it back so I can download and look at my data logs?

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Developer
    Craig Elder May 3, 2014 at 12:22pm

    You can download logs from the log files tab.  There is no need to use the terminal any more and in fact we will be remving it in the next releases of the code

    • Andy Beveridge > Craig Elder May 4, 2014 at 4:53am

      How can I then erase the EEprom, as I believe I nEed to do this when updating software?

      I get a flip on take off and the reading I have done leads me to believe I need to do this erase ~ any pointers to alternatives, or should I go back to a previous version of MP?

      Chees

      Andy

      • Developer
        Craig Elder > Andy Beveridge May 4, 2014 at 11:18am

        There has not been a requirement to erase the eprom for more than 2years.

        • Developer
          Craig Elder > Craig Elder May 4, 2014 at 1:09pm

          You can always set SYSID_SW_MREV to 0 and reboot to erase the eprom.

        • Andy Beveridge > Craig Elder May 4, 2014 at 12:01pm
          OK, thanks.
          My quad flips on trying to take off, and what I read indicates that I need to erase and reinstall, but I could not find the CLI terminal in MP 1.3.0.

          Any advice on what I am doing wrong would be gratefully received!

          Cheers
          Andy
      • Steven G > Andy Beveridge May 4, 2014 at 5:20am

        The current version still works as before in CLI. It sounds like a new interface is coming that will be more intuitive. I believe the latest non-beta is 1.3.1

    • Developer
      Craig Elder > Craig Elder May 3, 2014 at 2:09pm

      Everything is being replaced wih a MAVLink command

    • Steven G > Craig Elder May 3, 2014 at 12:59pm

      And where will "test"be???

  • Steven G May 3, 2014 at 5:08am

    Did you check the advanced box in the planner config screen?

This reply was deleted.

Activity