Hello all,
I just got a Pixhawk and was able to complete all 16 steps in Mission Planner.
When it came time to do the receiver, I used a Spektrum SPMAR9030T (SRXL).
I made a cable to connect to as per instructions here: http://ardupilot.org/copter/docs/common-pixhawk-and-px4-compatible-rc-transmitter-and-receiver-systems.html
Problem is that I accidentally left the positive wire, then connected a powered up receiver.
After that, I only see two small green LED's flashing on USB power. When I remove USB and apply power to the power port, I see some lights on the board, then the bright middle LED goes solid red.
I am very good at soldering (It someone knows off hand what components I need to change)
I would be forever grateful to anyone who can help me out. Otherwise I'll order the PX2...
Thanks to all those who took the time to read my post. Please let me know if I have left out any vital information.
Thanks!
Gramslam
Replies