Hi all,
Basically for the IMU and Motherboard I am using (Arduino) I need to take the power from a 1000mAh 11.1v Lipo battery and convert it to a 3.3v power source for the boards. However, I also need this same battery to power four brushless motors (I dont know the exact ones, but I can get that information if It is needed).
So, How can I conver the 11.1v to a 3.3v and if so where can I find a converter?
and, Can I split the power from the board to the motors, and if so where can I find a splitter?
Replies
I would think the ArduCopter Power Distribution Board can bring your motors and esc's together.
Then use the 5v ouput from it, into this little bad boy to convert it to 3.3v... http://store.diydrones.com/I2C_SMBus_Voltage_Traslator_I2C_Level_Sh...