just received a QNOVA from Hobby King and proceeded to tear in down to get to the flight processor for connecting telemetry and or FPV. I have seen many posts about how to solider the connections for the 3DR type telemetry but when I opened my quad up I found connectors installed instead of the solider pads. uART and ADC are obviously the connections but I can't find any discussion about the pin outs or any reference to this type of new board. Any help I can get would be greatly appreciated. Thanks in advance. See attached photos.
Nels see above the photo I took with the pin outs described to me recently by HK. I can't test them out since I bricked my 3DR telemetry before I found this. If you get your OSD working please provide info.
Replies
Can i add a power module to my nova even if it does not have the ADC port? Do you have any " how to .." link?
Nels see above the photo I took with the pin outs described to me recently by HK. I can't test them out since I bricked my 3DR telemetry before I found this. If you get your OSD working please provide info.
-
1
-
2
-
3
of 3 Next