Alright, I understand that the older Ardu-pilot could proces 3-4 channels to fly the plane.
On APM you now have 8 channels to play with?
Dose this mean I can have the needed servo channels to fly APM, and use 2 channels to control an pan and tilt for a camera set up?
Thanks ya'l
Replies
This is what i have so far,
Velocity = 15 meters/sec
Y = 100 meters
X = 50 meters
Gravity = 9.8 meters/sec
V=D/T Y= 1/2 Ay ^ T`
15 = 50/T= 3.3s to reacech target Horizontily
100 = 1/2 (9.8) ^ T`= 4.5sec to reach to reach target Verticly
X`+Y`=C`
3.3`+4.5`=30`=5.5secs to reach target (in english, the pay load should be dropped around 5.5sec's before reaching target)
essentually, if the pan and tilt is running off the APM, can I program the APM to move the pan and tilt to different degrees at different waypoints?
ex. way point 1 (move pan servo 30, move tilt -30)