The connector for the GPS cable was torn off my IMU in a crash. Are all of the connections for the GPS available somewhere on the header slots so I can rewire? I can get continuity on all but one but on that one the solder pad was torn off and I'm not getting contact with the multimeter. The one in question is connection closest to the outside of the board.
You need to be a member of diydrones to add comments!
Here's a graphic of what I'm asking. Checking continuity with a mulitmeter I can find all but the one closest to the bottom. That one the solder pad came off and I don't have a good contact.
Help would be greatly appreciated as I don't have $100 right now to replace this IMU. (Starving PhD student)
Replies
Here's a graphic of what I'm asking. Checking continuity with a mulitmeter I can find all but the one closest to the bottom. That one the solder pad came off and I don't have a good contact.
Help would be greatly appreciated as I don't have $100 right now to replace this IMU. (Starving PhD student)