Single beep when powering ver. 3.0.1

I just installed Ver. 3.0.1, but when I power my Hexacopter (APM), I am only getting a single beep instead of two beeps before it goes into it's tune.  The Mission Planner is not indicating an error, and I am able to arm the copter.  Note:  All motors respond correctly once armed.  Also, my hexacopter firmware was 2.9.1b, and there were no problems.     

Things completed before the problem.  

I flashed my Ardupilot Mega 2.5+ and installed the Arducopter firmware 3.0.1.  

Flash:  All green lights and "Success" once installed

Arducopter 3.0.1: No errors - "Done"

Accelerometer Calibration:  Successful

Live Calibration:  Compass offset x = 1.6373, Y = 4.316 and Z = -26.002

Note:  I haven't completed the Compassmot since I noticed the single beep when powering from the lipo battery.

I checked all of my connections and they look correct.  - Need some help.

Thanks.

2013-07-27 14-26-58.tlog

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • When using the previous firmware, I would get two beeps then the tune when powering the copter from the lipo.  

    Also, I am using DJI 30 ESCs Opto.  - Factory calibrated.

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @chr1sa: Our next @DIYRobocars virtual AI car race is next Saturday. Compete from home using the @donkey_car simulator -- no physical ca…
yesterday
DIY Robocars via Twitter
RT @RoboticMasters: Students from @Sydney_Uni working hard on improvements and changes to @donkey_car simulator. @diyrobocars @adafruit…
yesterday
DIY Robocars via Twitter
Practice virtual race this Saturday; the real thing will be on Oct 3 https://www.meetup.com/DIYRobocars/
Wednesday
DIY Robocars via Twitter
Wednesday
Derrick Davies liked lisa TDrones's profile
Wednesday
DIY Robocars via Twitter
Sep 21
DIY Robocars via Twitter
RT @SahikaGenc: AWS DeepRacer & Hot Wheels Track https://youtu.be/4H0Ei07RdR4 via @YouTube
Sep 14
DIY Robocars via Twitter
Sep 8
DIY Robocars via Twitter
RT @davsca1: We are releasing the code of our Fisher Information Field, the first dedicated map for perception-aware planning that is >10x…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: How this works: 1)object detection to find cones in single camera image, 30 frames/sec on @NVIDIAEmbedded Xavier. 2)comp…
Sep 8
DIY Robocars via Twitter
RT @SmallpixelCar: Use two color cones to guide the robocar. No map needed, on onsite training needed. Just place the cones and it will fol…
Sep 7
DIY Robocars via Twitter
Sep 7
DIY Robocars via Twitter
RT @roboton_io: Great to see http://roboton.io running at 60fps on the cheapest #chromebook we could find! #edtech #robotics #educat…
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Crazy in-depth article about using the OpenMV Cam for Astrophotography: https://github.com/frank26080115/OpemMV-Astrophotography-Gear https://t.co/BPoK9QDEwS
Sep 3
DIY Robocars via Twitter
RT @openmvcam: Hi folks, it's finally here! Our first draft of our Arduino Interface Library is out! It works over SoftwareSerial, Hardware…
Sep 3
DIY Robocars via Twitter
RT @chr1sa: Please let them have an open API. This would be perfect for @DIYRobocars races https://twitter.com/NintendoAmerica/status/1301513099707658246
Sep 3
More…