Flying well in manual mode
Flying strange in stabilized mode
Recently I tried to use HIL(Hardware In Loop) simulation function in the QGroundControl and I use PX4.
At first, I use QGroundControl 1.3.0v and tries to have connection with Xplane9 it seems to work but the other input from my RC controller was ignored so there was no response in Xplane9.
But I find out that I'm using relatively old QGroundControl software and I thought that could be problem.
So, I updated my software and it seems to work. But, it worked only in manual mode I've been tries to use stabilized mode, mission mode but only manual mode work properly. Other mode drive aircraft crazy when I use that mode
Does anybody have an idea about this?
Replies
Please check out my plane doing strange behavior when stabilized mode at attachment file