Hy there
I am starting to get some strange problems lately. I have installed 2.24 arduplane code. When i reset the autopilot and connect it to see parameters in APM Planner strange things start to happen. When i press on pitot tube the hud goes crazy... it moves up and down, left right... this is one problem. When i dont have airspeed connected and when moving airplane the hud follows but very slowly.. it has a huge lag... I haven t changed the code or anything.. uploaded from APM Planner... Also when doing preflight inspection when in stabilize mode or auto mode on the ground there is no contra controls movement
Please for an advice
JL
Replies
have a look at this
https://code.google.com/p/ardupilot-mega/issues/detail?id=431