Discussions

Hi All,

I have broke the USB connector on APM 2.5 board, the connector is no longer connect to the board and the copper trace is also gone too, basically there is no way to solder it back.

right now I'm using FTDI cable to connect APM to my computer through the telemetric port, I can do configuration using MAVlink, but I can't do:

- CLI

- read logs

- load new arducopter firmware

I'm wondering if there is any way to accomplish things listed above with just the FTDI cable, I do have a USBAVR programmer to program the atmega if needed.

any help is appreciated.

thanks