Discussions

hi all,
i'm absolutely stumped! i've searched far and wide for a solution to this and i can't even find anyone who's had the same problem let alone a fix. i've flashed all six f-30a escs from my hexa with simonk and i'm now getting this weird throttle issue. at mid stick i get 0% throttle, and at both endpoints i'm getting 100% but opposite rotation at each end. i've eliminated the apm as the source of the issue by plugging in an unflashed esc and the throttle works fine (0%-100%, bottom stick to top).

i double, triple, quadruple-checked that i flashed the correct firmware and each flashing was successful with no errors.

can this be fixed through mission planner setup or is it purely a simonk issue?

cheers!

if it helps i'm using a taranis plus, x8r rx, apm 2.6 fc and multistar 2213-935 motors. the fc is being bypassed while i try to fix this.