Y6 + ACM2

Hey Guys,

i will be building my Y6 soon, and want to fly it with the Arducopter Electronics.
I hope to build up a database here for the people flying ACM2 on their Y6s.

So if you have on, feel free to share: PID Settings, your frame setup, flight experiences, problems, ideas...

 

Regards

Daniel

 

 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Finished building my Y6 copter. As I will fly with AC2. Today I made my first test flight. But flying is not quite what I wanted.
    Time to take a closer look at all the settings.
    At the moment I have only the basic settings, the "first time setup".
    With the X frame. Will try + frame and see if it will help.
    Thank you for all the help I can get from all of you out there :-))3692241504?profile=original3692241460?profile=original

  • All looking great, interested how flight reports with the APM will be..
    Daniel
  • I got my Y6 finished havent had a lot of time to work on it lately. However i did put a KK board on the frame to see how it would handle being in the air. Hopefully if time and weather 3692221077?profile=originalpermitting I can get my APM mounted and configured for a test flight today. Here's a pic of the finished Y6 with a KK board mounted
  • heres a link to my Y-6 bulid   http://www.rcgroups.com/forums/member.php?u=241417
    tom6696950's blog - RC Groups
    RC Groups - the most active Radio Control model community: electric and fuel rc airplanes,rc helis,rc boats and rc cars. Features discussion forums,…
  • Hi Daniel G Im also in the process of building a Y6 that im planning to fly  on ACM2. Im currently in the near end phase of the build. I have the frame built with motors mounted and wired. I just finished building a box to house the ACM hopefully i can get the ACM mounted and configured tonight..... I will keep you posted on my progress. Here's an earlier pic i took

    3692218013?profile=original

  • i will be building my Y-6 in the next week or so will post when done and i think this would be a good idea  Tom 
  • Nobody flying a Y6 and interested in sharing their experiences?
This reply was deleted.

Activity