8 kg payload with multirotor

Posted by Raam Sundar on June 6, 2016 at 11:44am

Guys,

I need to build a multirotor which can lift a 8 kg payload.. Im not so experienced so i need your advice what powerplant should i choose,.quad hex or octa which wil be more efficient and stable.Please help me out,, I wanna put tiger motors for this.. so guys if possible copy paste the link of the motor that you are suggesting.. it will be very helpful for me...

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

    • Todd Hill > matt.koestner June 9, 2016 at 10:30am

      You are obviously doing something wrong then.  The 170KV on 14S 80A ESCs' on a 12S Lipo turning 22" props barely gets warm in 80+ degree ambient temperatures Matt.  KDE are way over priced for what they are.  

    • Todd Hill > Todd Hill June 8, 2016 at 9:57am

      Also, if you are wanting to run big motors and props on a 6S setup you should check out the Dualsky XM9010HD-6 300KV motors.  

    • Patrick John Joesph Green > Todd Hill June 20, 2016 at 4:37am

      :)

  • Christopher Rice June 6, 2016 at 11:52am

    I'm a big fan of the T-Motor, in fact I run 8 Navigator 4120s on a CarbonCore Cortex X8. For your purposes, you should look into these: http://www.rctigermotor.com/html/2014/Efficiency-Type_0314/198.html Pricey but you'll need some serious lifting power.. 

This reply was deleted.