To provide the users of Blue Robotics ROV hardware/software an area to discuss their ROV Projects

14 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • Admin
    Thomas J Coyle III February 24, 2016 at 6:15pm

    Hi Grant,

    Sweet!

    Regards,

    Tom C AVD

  • Developer
    Grant Morphett February 24, 2016 at 6:08pm

    I've just ordered two T200 with basic ESC.  Self powered/navigating kayak here we come!

  • David Boulanger February 18, 2016 at 10:28am

    Nice video and well lit.

    Regards,

    David R. Boulanger

  • Admin
    Thomas J Coyle III February 18, 2016 at 10:03am

    Hi All,

    Here is a recent video shot using a BR BlueROV:

    Regards,

    Tom C AVD

  • Admin
    Thomas J Coyle III November 15, 2015 at 11:38am

    Hi All,

    Check out my review of Rusty's new vacuum tubing adapter for vacuum testing of WTCs.

    Regards,

    Tom C AVD

  • Admin
    Thomas J Coyle III November 10, 2015 at 6:51am

    Hi All,

    For those of you who want to vacuum test your WTCs for potential leaks, Rusty has come up with a vacuum tubing adapter that takes the place of the plug in the WTC Enclosure Vent. It is not in the BR Store yet, but I am sure that it will be shortly.

    Originally I had to make a vacuum tubing adapter out of a 1/4 X 1/4 brass tubing coupler and a 6 mm cable penetrator and the vacuum tubing adapter took up one of the holes in the WTC End Cap. Now all you have to do to vacuum test your WTC is remove the plug from the WTC Enclosure Vent and replace it with the vacuum tubing adapter. When you are done testing, just remove the vacuum tubing adapter and replace it with the plug. No fuss, no muss. Sweet!

    Regards,

    Tom C AVD

  • Admin
    Thomas J Coyle III November 10, 2015 at 6:04am

    Hi David,

    Unless a member has a well equipped workshop and plenty of time on his hands, the BR kit is the way to go.

    Being retired, I have plenty of time to indulge on my ROV Project:-)

    Regards,

    Tom C AVD

  • David Boulanger November 10, 2015 at 5:08am

    Tom,

    This is a good idea.  If I decide to get into ROV's I would probably buy the BR kit.  It seems to be priced right when you look at every thing you get and could be modified for additional gear later.  Your build is impressive but a lot more work than I have time for at the moment.

    Regards,

    David R. Boulanger

  • Admin
    Thomas J Coyle III November 10, 2015 at 4:28am

    Hi David,

    My ROV Project discussion thread was getting quite long and I feel that starting this Group will give BR hardware/software users a specific place to discuss hardware and software issues.

    Regards,

    Tom C AVD

  • Admin
    Thomas J Coyle III November 9, 2015 at 6:30pm

    Hi Rusty,

    Nice to have you onboard, much appreciated.

    Regards,

    Tom C AVD

This reply was deleted.

Forum

Photos