Replies

  • Tommy Sylte February 17, 2013 at 5:07am

    etter det jeg vet så skal tuben stå 1 cm ut av flyet og rettest bak mot sensoren. slangen skal bobles til ovre inntak..

    Ref. you'll need to push it through the foam in the cockpit so it points straight into the airstream. Make sure the holes in the side of the tube are not covered. They should be at least 1 centimeter out past the nose. First connect the two tubes coming out the back to the airspeed sensor. The tube coming straight out the back should go into the top port and the tube exiting at an angle should connect to the bottom port on the airspeed sensor.

    http://code.google.com/p/ardupilot-mega/wiki/Airspeed

This reply was deleted.