Gender
Male
About
Location
Fayetteville, AR
About Me:
University of Arkansas
Please tell us a bit about your UAV interest
Researching UAV control with the University of Arkansas
Hometown:
Fayetteville, AR
Activity Feed
"I'm back!
So, after adding foam to dampen the vibrations to the APM, most of my issues were resolved, and it flew pretty well...
After not using it for like a month, it now wants to flip over (to the right) when I give it any throttle. Attached is…"
So, after adding foam to dampen the vibrations to the APM, most of my issues were resolved, and it flew pretty well...
After not using it for like a month, it now wants to flip over (to the right) when I give it any throttle. Attached is…"
"Hey Dusty,
Looks like I fell off the face of the planet for about a month... Anyway, I'm using the DX7se controller, and I have the controls set non-linearly (It makes the flying on my MikroKopter incredibly easy). Also, are you flying in stabilize…"
Looks like I fell off the face of the planet for about a month... Anyway, I'm using the DX7se controller, and I have the controls set non-linearly (It makes the flying on my MikroKopter incredibly easy). Also, are you flying in stabilize…"
"Here's the latest and greatest video:
RATE_P is set to 0.144 I and D settings are 0. STB_P is 4.5 and STP_D is 0.005
"
RATE_P is set to 0.144 I and D settings are 0. STB_P is 4.5 and STP_D is 0.005
"
"Thanks all for the help! Turns out I was just pussyfooting around the controls and throttle. As per Jan, I changed up my RATE_P and am seeing better results. It's still pretty dang tough to fly, so it definitely needs a lot of tuning. I'll post…"
"Here are two videos of it in X mode:
I didn't want to lift it any more or it would have gone completely out of control. Just hoping this might help someone help me out!
Blaine"
I didn't want to lift it any more or it would have gone completely out of control. Just hoping this might help someone help me out!
Blaine"
"No, I haven't got them fixed yet. I'm just sitting here in the lab fiddling with stuff on the copter hoping for some sort of breakthrough, but it doesn't look very promising right now....
I started a topic on the subject to try to reach out to the…"
I started a topic on the subject to try to reach out to the…"
Hey all, I'm having some real problems getting my new guy to take off. This is everything from the jDrones kit (except in the Xaircraft hexa frame), 850Kv motors, 20 Amp ESC's, hexa PDB, 10x45 props, APM1.0. On takeoff, the copter wants to move to…
"Dusty,
Thanks for the replies! I went ahead and actually modified the carbon fiber just a bit so I could use the existing holes on the pcb. Our jDrones also took a dive (<5 ft.) and after that, we realized the frame was a pile of junk (especially…"
Thanks for the replies! I went ahead and actually modified the carbon fiber just a bit so I could use the existing holes on the pcb. Our jDrones also took a dive (<5 ft.) and after that, we realized the frame was a pile of junk (especially…"
"I went through a very similar situation as you, and am currently replacing my jdrones hexa with this bad boy. Already very happy, and this is only after 10 minutes of assembly (it seems very sturdy)! Question though, how/where did you attach the…"
