Location
Lafayette, LA
About
About Me:
Engineer with interest in building and flying UAV's.
Please tell us a bit about your UAV interest
Use of UAV's for Precision Aerial Surveying
Hometown:
Lafayette
Activity Feed
"Sub-mil Talon Scans (Full exterior, left side right side)"
"Updated link to Talon STL scan files! ENJOY"
"Will update links on Tuesday!"
"Talon sub-millimeter scans...
https://www.dropbox.com/sh/1tfp7js4okg23c2/AABPs6qV5z1Lr0RalOuS_4OS...
3D Print Modifications...
https://www.dropbox.com/sh/cj9k4h50j55uj6n/AAB43Sbdl_STocZCnVM3HnkF..."
https://www.dropbox.com/sh/1tfp7js4okg23c2/AABPs6qV5z1Lr0RalOuS_4OS...
3D Print Modifications...
https://www.dropbox.com/sh/cj9k4h50j55uj6n/AAB43Sbdl_STocZCnVM3HnkF..."
"Gimbal working very well. In the next week I will try and post some of the video footage."
"Talons finally finished and all is working as planned. Fly's well.
https://youtu.be/aAX82FhT2Ak"
https://youtu.be/aAX82FhT2Ak"
"Sorry for the delay guys on the final build... in the meantime was pursuing my "Private Pilot" certificate and just finish. That effort took much more time than I expected. I now have two builds on my plate to include the Talon and DJI S800 EVO…"
"Dennis thanks for the remarks... just in case you were not aware, I have more detail on my build and current build status under my DIY profile: http://diydrones.com/profile/RyanFuselier
To answer your questions, my profile build is current as I…"
To answer your questions, my profile build is current as I…"
"Ok, new links to my latest Talon designs and scans of Talon. I will not put a time limit on these new links.
Talon Full Drone Exterior Scans-STL
Talon Modifications by Ryan-STL
Enjoy..."
Talon Full Drone Exterior Scans-STL
Talon Modifications by Ryan-STL
Enjoy..."
"Sorry for the delay on post and updates to build... for good reason, there has not been any progress since last post. I shifted gears on my spare time an energy and have been working on my Private Pilot's License. I need this certification to meet…"
"Turnigy Mobius Gimbal with Tarot Controller installed but not tested. Install went very well and it all fits nice and snug. Clean fit. Here are some picts of the install."
"Just completed design for Turnigy Mobius Gimbal with Tarot Controller. Setup is small, lightweight and perfect fit for XUAV-Talon. I will show install pictures after I 3D print. Glass dome is standard with Talon, however I had to redesign cowling…"
"STL Files to all Talon upgrades as shown in profile build log to date. More to come as project progresses. Keep in mind that when 3D printing to print all parts at 101% to account for shrinkage.
Tip! When printing parts with hatches, print…"
Tip! When printing parts with hatches, print…"
"Nick,
Below is the link you have requested. Within the next few days I will also post the STL files for all items I have 3D printed to this point in the build.
Talon Sub-Millimeter Scans"
Below is the link you have requested. Within the next few days I will also post the STL files for all items I have 3D printed to this point in the build.
Talon Sub-Millimeter Scans"
"On a side note: check out the new Thermal Camera from Flir. I saw one in person at AUVSI this year in Atlanta. Very Cool!"
