- Lesson 1: Little blimps need still air
- Lesson 2: If you can't find still air, you need WAY more powerful thrusters (which means more battery power, which means more weight, which probably means a bigger blimp)
- Lesson 3: Don't update your firmware five minutes before you're going to fly an autonomous robot ten feet away from a former Vice President of the United States.
- Lesson 4: Hey, it's a tech demo on stage, and they *always* go wrong--don't let it throw you. So I didn't. I just stood there holding the blimp, as you can see in the picture above, and went on with my talk and slides as planned. Points made, time limit met, applause gained. I looked a bit awkward, I'm sure (although hopefully not always as unhappy as I look above), but at least I got the sympathy vote! Now on to San Diego for Etech on Tuesday, where we get to do it again for an hour in front of the smartest geeks in the world. So much for the sympathy vote ;-) Jordi's hard at work fixing the firmware problems, so fingers crossed...
You need to be a member of diydrones to add comments!
Comments
http://www.longtail.com/ted.ppt
Lesson 3 is a big one. No matter how tempting, don't mess with the software right before its deployed/used/demoed. You will get bit in the 4$$.
Can we see the presentation or the sides?
-
1
-
2
of 2 Next