Hello everybody. I have some news here:1.-The shipping system right now is a nightmare for everybody (including me). Finally i found a good solution that will let me ship overseas for less than 5 dlls (under 4 oz). Yes i will accept First Class Mail soon, YEAHHH!!! It will be ready in two weeks.2.- The Infrared boards arrived, but i still waiting for some components in order to start the fabrication. Please be patient.3.- I ran out of ArduShield Kits!!!! Guys.. Let me breath! Tomorrow the new parts should arrive, sorry about that.Now lets talk about the new products:Ok ArduStation is now stocked, so you can order today and i will ship the same day (before 3pm California, Sun, Beach, Pacific time or 10pm Zulu time). You can buy it here.
As i already mentioned this in another post, I'm about to release the new ArduLogger in collaboration with Raúl Helvia and Eduardo Garcia (the Satellite guy) from Spain. Its an Atmega328@8Mhz and you can use it to data log the 6 analogs channels or data coming from the serial port:
(If you look carefully the picture, you will see my new Open Source ServoSwitch).And yeah! I finally entered to the gyro market. My goal is to one day offer everything you will need to build your own UAV and have an old school slogan like: "The official UAV store" or maybe "Satisfying all your UAV needs since 2009", LOL:
I'm offering right now the smallest LISY300AL breakout board. Same price as SparkFun and free shipping world wide (web?):
And for limited time i will offer the ultimate 6 degrees of freedom, super tiny IMU that can be adapted to your system very easily:
(Ardupilot just as size reference). Featuring the ADXL330 3g accelerometer and the famous LISY300AL with 300deg/sec. The best part is that you can upgrade it. You can choose between 4, 5 and 6 degrees of freedom by just soldering the gyros you need (without buffering underrun your Paypal account) and because the main board is vertical you can solder it to your current home made autopilot PCB or even in a breadboard!This pic shows with arrows the gyros you will need depending the configuration you may want:
Ron Carter, can you please read this post? I already answer that question. Bill said that? Can you ask Bill when is going to send me the Gerber files in order to make the stencils and produce the IR sensors?
This IMU is nothing related with ardupilot. Is just a normal gyro/imu breakout solution. I May use it to develop the ardupilot IMU code, but the board will be diferent.
Comments
just ordered a set of your new tiny IMU. Do you think that this little thingy is also usable together with a future ArduPilot ?
Erwin
Also, is that silk screen wrong? The top line reads
ST, OUT, NA, GND, 3.3V
The left line reads (rotated):
ST, NA, OUT, GND, 3.3V
???
you are already breaking my piggy bank ;-) and you keep coming up with new gotta have`s you delightfully wicked wizard LOL
-
1
-
2
-
3
-
4
of 4 Next