This is the video of first fly test
with great pleasure we present the latest developments of the prototype # 1 of our first drone RTF.
The idea for this drone , began when Carlo a student of the faculty of Industrial Design in Milan came to us to do his thesis ... we tried to think of something completely new and that it was not the classic drone MK or DJI 450.
In addition to the aesthetic aspect ,appreciated by the community, we have especially tried to make the drone in a very functional, easy to maintain, expandable with options which will be released in the future.
The frame initially was made with 3D printing, combined with inserts from epoxy glass and carbon fiber .
Our designer Carlo ... ,now officially came into VRI , with Flavio studied the FEM of the drone to achieve a good level of resistance to twisting of the drone. Particular attention was held for the theme of the vibrations.
The BOD have inside :
- VR Brain 4.5
- GPS Ublox 6H
- 3DR Radio
- 4 30 Amp ESC with WiiEsc firmware.
- use 4 T-Motord engines.
- with 12 inch propelles.
- 3S - 4S 4500 mah battery
The feature available are the same available in arducopter32 rev 2.9.3
- Flight in acro and stable mode.
- Loiter , return to home and auto navigation.
- Auto landing and takeoff
After making the first hovering Emile will take care to test it in order to put a little 'under pressure the drone.
Thanks to all the time for this great results :)