I have ordered a hole bunch of stuff from small parts cnc and I am in south africa, he shipped me in very quick time both motors mounts and bixler mount.
But I would replace these motor mount with something that will not break after a little while... these carbon fiber parts show stress fracture after something like only 3-5 hours of regular usage.
They also induce a lot of vibration, when you switch to billet alu you will notice the difference.
Comments
Wich motors are you using?
if it can reduce the vibration I'll try. I found on ebay.
http://cgi.ebay.fr/X400-X500-X525-X600-X666-QuadCopter-Multicopter-...
http://cgi.ebay.fr/X525-QuadCopter-QuadFlyer-Aluminum-Motor-Mount-S...
Dany, that would be interesting if the CF parts crack, but aluminum doesn't? It might just be because the CF is too thin?
I have ordered a hole bunch of stuff from small parts cnc and I am in south africa, he shipped me in very quick time both motors mounts and bixler mount.
Nice!
But I would replace these motor mount with something that will not break after a little while... these carbon fiber parts show stress fracture after something like only 3-5 hours of regular usage.
They also induce a lot of vibration, when you switch to billet alu you will notice the difference.
This is what we are using: http://www.canadadrones.com/X1-X525-Aluminum-Motor-Mount-Set-p/x1-m...
and if you are in the USA get them from: http://smallpartscnc.com/index.php?route=product/product&produc...
Keep having fun!
Dany