Hello and happy new year for all of you.
I would like to present new functionality of assisting pilot for landing in hard conditions like fog or night recorded last night by Jwalentek, our test pilot using OSD+AP kit,
On screen are 2 new components. One in the centre of view is envelope of runway with approaches lines, second below is ILS with 2 crossed lines showing relation plane to ideal landing path.
At this moment it is experimental firmware. Final functionality should be available soon.
Comments
@Simon, thx, yes from the FR part...
@Hugues: http://www.swiss-composite.ch/, they have a french site too (i guess you are from the french speaking part?)
Hugues, thank you for recommendation.
I am not manufacturer of that tubes, so can't do 0,5mm thin tube. My manufacturer also doesn't do it. Look for local composite companies, but it could be very costly.
I do not know how good your firmware is but I can recommend your services for excellent CF tubes and other multirotor accesories. Was shipped fast too within Europe.
By the way I wanted to know if you could make 0,5mm thick CF tubes ? (currently you have 1mm thick ones and I would like to reduce weught by a factor of two...)
Really cool, well done.
-
1
-
2
of 2 Next