Blogs

Looks like it works. (3DR 915 multipoint)

Posted by Tommy Sylte on September 27, 2014 at 6:00pm
3689618597?profile=original
I've always wanted to see mavlink data on more than one device. I read through several pages, but had to try and fail. Visited blog entries Adrián Nagy hinst and Brit Davis. A little back and forth upgraded the firmware to my stanard 3dr robotics radio and it was not working, downgraded firmware and the radio worked normally only slave to a master. I think a little while and trying again. but now I updated just two radios, so I found the pattern. see picture and video.
E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Tommy Sylte September 28, 2014 at 9:23am
    I believe to have read that it is the same firmware on 915 and 433 MHz radios, only the transmission frequency that is different, search on both names in this the blog and I do not take much wrong as it says in one of the pages there. But I can not take any responsibility. What you do is at your own risk.
  • Babis HatziIoannou September 28, 2014 at 8:18am

    are u tryied with 433Mhz?

  • Rana September 27, 2014 at 8:04pm

    Great, thanks for sharing.

This reply was deleted.