Blogs

Dear Friends,

in last month we working on Multipilot32 platform , we develop library and porting ArdupiratesNG and Ardcuopter 2.0 firmware on this Arm Platform. It's compatible with standard Diydrones accessories ; Oilpan , Magnetometer Sonar and GPS.

But we're working on improve our Board this is the result of our work :

Mukltipilot32 "Build your Dreams" BYD support some upgrade the main is that can use two micro controller :

Stm32F103 72 Mhz 512 K flas 64 K ram or new revision of this micro STM32F205 , this is the first board available on the market that support this powerfull micro 120 Mhz 1 mega of flash and 128 kbyte ram.

You can reserve your sample and join us to port library and ACopter firmware on it. In the next week will be available a limit serie of board with 32F205 , for more info about this micro this is the link :

http://www.st.com/internet/mcu/product/245093.jsp

For more info contact me at : lasernav@gmail.com

On the board there is a new micro but also a secret pod :)

We change the position of SD card and now it use SDIO bus not SPI , more powerfull with dma and parallel bus.

On the board there are some pad with Label DON'T TOUCH , with this pad is possible to setup for STM32F103 or STM32F205 micro controller.

Original Post : http://www.virtualrobotix.com/profiles/blogs/multipilot32-build-your-dreams