Overall width 680mm , length 840mm
About 5 hours work in it so far, the centre section and motor mounts are pre made for me out of 2.5mm fibreglass
Nuts/bolts 3mm and 4mm
ESC's were stripped so they could be "daisy chained" on the input side, and have the motor wires direct soldered on the output side.
They are mounted on the side pods, as this keeps the high current DC (and associated mag fields) far away from the Magnetometer , about 120mm seperation
FC is an ardu, with mag, gps and sonar.
Now to get into the code, and do a custom mix, will take the Y6 code, as its close , and modify it, will do one version for the Vtail 8 (needs 5 channels) and a version for the Vtil Y6/Y4 (needs 4 channels)
Batteries will be 4S 12000 mah (good for about 10 kg total thrust) and carrying a maximum of 1kg DLSR