project, step by step instructions to build your drone.

Hello everyone,

Today I want to share a new initiative that I have, is the creation of a blog where I colacare the instructions step by step how to build drones. instructions will be specific for each type of aircraft, that have ensured that many frustrations with generic information that sometimes requires previous conocimeinto to build a drone. My goal is that if I place specific instructions for each type of drone (eg x5, raptor, skywalker, etc..) this ensures that the learner's curve is reduced, and errors are reduced.

This initiative came about many questions I get from the post that I publish diydrones forum.

Blogs will be in English and Spanish, I apologize if there are mistakes in English, I am using a translator. Will do my best efforts to create this is my blog

http://www.makedrones.com

Any suggestion is welcome.

You need to be a member of diydrones to add comments!

Join diydrones

Comments

Igor Timofeew April 24, 2013 at 11:00pm

You can tell more about the landing by parachute?
jim C. April 21, 2013 at 10:19am

only construction
Moderator

Vladimir "Lazy" Khudyakov April 21, 2013 at 10:08am

BUILD or BUY? I seen differences...
jim C. April 21, 2013 at 7:37am

Acorn,

initially will be the construction of airplanes. X5 is the first wing contruction and instructions, but in a couple of months will be built multirotores. it all depends on my availability of time and economic resources to buy the hardware environment.
Acorn April 21, 2013 at 7:23am

Will you be building any multicopters?
Acorn April 20, 2013 at 5:21pm

Looking forward to hearing more. - Noobie
Alfred Alan jr April 20, 2013 at 12:13pm

Excelente musica, buena suerte!
Admin

Thomas J Coyle III April 20, 2013 at 10:29am

Different build perspectives are always encouraged at DIY Drones.

Regards,

TCIII
eduardo April 20, 2013 at 9:25am

Afff ... another blog about "build your own drone"

This reply was deleted.