Developer

Quadcopter Evolution with the QRO v6 and a GoPro HD wide on board



Fun Quadcopter Evolution with a GoPro HD wide on board

The flight tests of my Quad Rotor Observer (QRO) v6 are still on track in spite of the cold winter. Above you will find some flights videos recently done. The flight of the QRO is really fun and very stable as you may notice in the on board videos and the piloting of the QRO very easy...

I have tested successfully on this frame various KKmulticontroller boards:

- KKmulticontroller Minsoo's "blue board",

- KKmulticontroller "Jakub" version upgraded with an Atmega168,

- and my home made KKmulticontroller with an ATMEGA168 20PU.

The flight controller firmware used is the XXcontroller_KR_v1_4a and based on assembly code by Rolf R Bakke converted by Mike Barton modified by Minsoo Kim and Jean-Louis Naudin

The basic setup is:
- 4 brushless motors 750 Kv RCtimer 2830-14
- 4 ESC 30A
- Lipo battery Turnigy 3S (11.1V) 2650 mAh
- receiver Corona CR6D 2.4 Ghz

Video Camera: GoPro HD Wide

More videos and tests results are coming soon,

Stay tuned on: http://diydrones.com/profile/JeanLouisNaudin

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones