Quadrocopter Rebuild

3689488773?profile=original

Hello Community, After a crash from 600 meters, i needed to rebuild my small Quadrocopter.

 

it's based on:

APM 2.0

ESC: Mystery Blue Series 20A Flashed with WiiESC

Motors: robbe roxxy 2827-35 (760kV)

Props: Graupner E-Props 11x5 (to small for 3S Lipo i need 12x5 or 13x4.5)

Lightcontroll ESC: Its a Old ESC reflashed with my Own Lightcontroll Software :)

Front (RED), Back (Green) and Position (White) LEDs are separately Controlled

With the Lightcontroll ESC i can monitoring the voltage and let blink the LEDs to show the Battery are Empty.

Weight Of Copter: 550 gramm without Battery

3689488676?profile=original

almost finished....

3689488749?profile=original

For fast ESC Reflash i Build  a "Benchstand", now i can flash my ESC in 5min without any Solder...

3689488794?profile=original

This is one of the First Lightcontroll Version I write, its just the Startup lightshow :D

and here it Flys

And I have still more fun with my Ardupilot than with my Mikrokopter :)

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

This reply was deleted.